How to Setup a Home Wireless Network in 10 Minutes
Having a Personal Area Network (PAN) with the help of a Bluetooth dongle is not enough for me. I need to have access access to the internet anywhere within the house.
Tonight, I paid CD-R King a visit and grabbed the cheapest Wireless Broadband Router they have. I was given with the LP-8186.
The LP-8186 is a wireless broadband router that support 802.11b/g, as well as WiFi a & n classifications. What made me bought the unit was the fact that it also supports up to 4 wired network connections, as a regular 4-port hub will do.
From the time I opened its box, attach the Smart Bro UTP cable to the router, turned on my PC, and launched the setup program, I just took me around 7 minutes. Fired up my desktop’s internet browser and it connects to the internet. Fired up the internet browser in my HP Mini 2133, which is around 10 feet away from the router, and bobreyes.com loads.
To ultimately test its capabilities, I went up to the second floor of our house, tried to surf, and it worked!
Here are some specs of the LP-8186 as printed in its box:
- Supports Gateway modes
- WEP, WPA Encryption – 64/128bit (WEP), WPA TKIP
- TCP/UDP/ICMP/ARP protocol stack
- Dynamic DNS
- DHCP Client and Server
- PPPoE PPTP
- UPnP
Tomorrow, I’ll test on how far can the AP reach — car port? sidewalk? sari-sari store?
If you were helped of this post, your “Thank you!” is accepted, but your PayPal donation is better.
Popularity: 24%
Did you enjoy this post? Why not leave a comment below and continue the conversation, or subscribe to my feed and get articles like this delivered automatically to your feed reader.
Comments
I have the same router, however, i’m having problems with the wifi part.
i can browse the pc using the LAN connection. however, i can’t browse the internet using my phone via WIFI (i can connect to the router but can’t browse any page). my phone works with other free hotspots.
Can you please help me out?
hi sir,im having problem with my cdr king router…it always redirect to the smartbro portal..btw im using smartbro….i cant use 2 pc at the same time..please help me…cn u email me @ g_mantra22@yahoo.com…tnx so much
hi bob, i have the same router as yours but im really having a bad time with my router. My router works well with my desktop but the problem is in my laptop it says Access Local Only But i cant connect to the internet my isp i smart bro. Also im trying to reinstall the configuration CD for the router set up but the cd says that UNCONNECTED!! every time i tried to play the CD it just say UNCONNECTED. Hope u can help me. GODBLESS BRO and MORE POWER
@coolstrike: did you try to enter your username and password?
This is actually a security feature of smart bro. They already recognize the original MAC address of the pc the connection was installed.
Normally, entering the username and password fixes the problem.
If not, the CDRKING ROUTER has a CLONE MAC ADDRESS feature. Use it and use the MAC address of ur PC (the one where smart bro was originally installed).
btw.. here’s my email address: jappykoh@yahoo.com
hey guys, pls help me. im also using the same CD-R KING router like bobs. at the first time i set up the my connection, i have a desktop and a laptop connected via router, i connected the Smartbro utp cable to the WAN port, and the 2 computers had internet, but this time, i lost my connection because i had a delay on paying my account, but now i have my internet connection back, and after i connected it again to the router,my 2 computers had no internet. why is that? i think its the router who has the problem. help me ASAP pls. this is my email add -> keizee311@yahoo.com. thnx
i successfully connect my router LP-8186 wirelessly and LAN-ly.
Heres the Solution:
First, u nid to know that mine is vista ultimate. And our network is skycable (ZPDEE) OR INTERNET SERVICE PROVIDER.
when u already installed ds router kindly reset ur router by holding the button 20secs. (need to use a pin-like to fit the hole)
if not, proceed..
step 1: plug ur router LP-8186
step 2: connect ur modem lan cable to ur router LP-8186 WAN slot.
By now ur WAN n POWER light should be lighted. And WLAN blinking.
step 3: turn on laptop or desktop, turn on wireless network, search for wireless network, then connect CD-R_King.
step 4: w8 until it connects. when connected, thats the tym u open un broswer (Internet Explorer or Mozilla). Type in 192.168.1.254
u should be able to connect to ur router. if not, repeat procedure.
step 5: u shud be able to see the settings of the router labeled at the left side. To input security,go under wiress then security,WEP, click set WEP. do ur thing then apply changes,ok,close.
step 6: on ur lower ryt left click on the 2 computers, click connect to a network. then ryt click the network that u wer connected before, select properties, security type should se shared,encryption type should be WEP then ur password.
i guess that would be it.. hahaha..
i need help setting up a wired hub in my home…. can you e-mail me if you’re willing? thank you very much. my email address is degil_omictin@yahoo.com. there’s a bit of a problem i wanna stress out regarding setting up of my hub with my smartbro account
hi! i don’t if i shpould post my question here, not a techie person… i also brought the same wifi router, CD-R Kings’ LP-8186… router was set up by the smart broadband personnel who installed our broadband connection… we have 3 laptops (acer aspire one / win vista), acer aspire one netbook (xp) and an asus eee pc 701 (converted to xp)… the two acer laptops can detect the wifi connection but the asus laptop can’t… when i check the properties of the router connection on the acer netbook, it was set up using WPA2-PSK, and when i check the wifi properties on my asus laptop there is no option for WPA2-PSK, just WPA… i think i need to reset the router but don’t know how… i’m afraid if i do, other laptops won’t detect wifi… help! oh, my nokia E63 phone can also detect the wifi signal and was able to connect online… pls help… my email add is bhebhe_koy1105@yahoo.com… sorry if i posted wrong…
Hi, just need help. I bought the same router for use with my vista laptop. problem is, until now I’m forced to use the LAN. everytime I connect to the WLAN, it says disconnected (even with the LAN connected). I can’t figure it out since the signal is fine (100%) but the laptop just can’t connect with the router.Would really appreciate the help, thanks.
Hi,
Been using this brand of router( lan, wifi) with smartbro for over a year with no problem. Until recently, I assigned a password via 192.16.1.254. Since then, i couldn’t connect on my wireless anymore. It’s giving me a “limited or no connectivity” flag or notice. Something must be wrong on the set up I did.
If there’s anyone out there who can help pls let me know. My email is bgarc1621@yahoo.com
have the same router working fine for the first couple of months… (bought it off my officemate, slightly used)…
suddenly, it can’t detect my pldt zyxel P600 series modem anymore… the WAN led on the router is not blinking nor the LAN led on the modem when the two are connected…
the only way i could get the router working again is to wire the modem directly to the computer first and make the internet connection run for a little while… after about 30 minutes or so, i connect the wire of the modem to the router and it’ll work again… the leds will light up and i could use the wifi… this kind of routine is now getting tedious…
please help me… my email is aya_1822004@yahoo.com
Hi. Could you please help me out? We have the exact same installer, but neglected to use it. Now that we finally have a use for it, we don’t know how to set it up anymore. We lost the box and everything.. I have just the router, a chord which seems to conenct to the internet and the one for the power. Tried hooking up everything but when I tried locating the wifi signal, it couldn’t be found.
What do I do? Please help..
hi! I have problem setting up my LP-8186 router. can anyone tell me whats the right settings for this router and how this setting can be done. I am not a techie person. I bought this since aside from being cheap it says on the box that it includes a quick setup disc. After installing the hardware I tried to run the easy set-up button for the sofware setup but it wont work. I tried to do manual but i can only connect to LAN at first there was no internet connection, I tweaked some more settings i ultimately got it but no wifi my compact and acer loptop cannot detect wifi signal. So I tweaked the settings some more, now I dont have both LAN and wifi. I got so frustrated i remove the router and got back to the modem connection.
I’m using PLDT myDSL with xyzel 600 modem. my OS is windows XP.
Hello! I bought a newer model LP-8686 but im having problem. Im using windows vista ultimate so i can easily see if i have an internet or not. my connection icon in the sys tray says “Local and Internet” but i cannot browse any sites or connect any instant messanger. So the two things im thinking for the cause of this problem is that the unit is defective or there are still some problems with the configuration.
I know this is a different unit but i hope you can still help me with it.
hi, i have the same wireless router but i can’t seem to configure it with both my laptops. the Quick Installation Guide that came with router isn’t helping and frankly the technicians at the cdr king branch near aren’t the most friendly ones. will you please help me? I have a NEO netbook and an HP laptop.. thank you in advance!!
Hi Sir, we both have the same router & it is working fine. Only thing is that I want to set-up a security access for my router, so that whenever the router is turned on, you need a user id & password to be able to have access to the wireless connection. Appreciate it a lot if you can spare some time sending me a step-by-step guide.
Still Merry Christmas & A Peaceful New Year!




.gif)











i have the same router but i can’t configure my wireless connection.. can you help me?